Model 3 Sport Side Skirt Extensions - Gloss/Matte Black

- 4 pieces x side skirt extensions

- Double-sided, autobody grade adhesive

- Phillips screws + washers

- Adhesion promoter

Step 1: Lay out pieces onto a soft surface upside down

Step 2: Insert corresponding pieces together

Step 3: Working on one side at a time, have a friend hold both pieces together so that there's no gap in between the panels

Step 4: While the extension is being held, screw the pieces together using the provided smaller gold screws

Step 5: Repeat with the other side skirt

Step 6: Wipe down the adhesive application areas with isopropyl alcohol or any degreaser

Step 7: Apply provided adhesion promoter to contact areas>

Step 8: Test fit side skirt extensions on the vehicle

Step 9: Jack up vehicle to gain clearance

Step 10: Peel adhesive backing

Step 11: Raise the extension to the vehicle, apply pressure to the exposed double sided tape

Step 12: Raise the extension to the vehicle, apply pressure to the exposed double sided tape

Step 13: Using the provided pre-drilled holes, screw in the rest of the hardware with washers applied (black screws)

Step 14: Repeat with the other side

Step 15: Wipe down newly installed parts with a quick detail solution or wash the vehicle