Tesla Wheel "T" Logo Center Caps + Lug Nut Covers + Puller Tool

- 4 x Center Caps in Silver

- 20 x Lug Nut Covers

- Lug nut cover puller tool

Step 1: Remove OEM aero-covers if necessary by pulling firmly and quickly away from the wheel

Step 1a: Try to grab as close to the center cap as possible

Step 2: Store OEM aero-covers as they will no longer be necessary (we also sell aero-cover storage bags!)

Step 3: If wheels already had no aero-covers and had different center caps installed then proceed with the following:

Step 3a: Carefully jack up the vehicle on each corner and put the vehicle on jack stands

Step 3b: Remove wheels using an impact driver or break wheels loose before lifting the vehicle

Step 3c: Once the wheels are removed, pop out the old center cap from the back of the wheel using the back of a screwdriver or a hammer with a light to medium tap>

Step 3d: Align and tap in the new center cap (You can use just your hand or if using a blunt object, be sure to have a microfiber towel or a buffer in between contact areas)

Step 4: If wheels had original aero-covers on proceed with the following:

Step 4a: Align and tap in the new center cap

Step 4b: Careful not the scratch the new center cap

Step 4c: Can be avoided by putting a folded microfiber towel on the face of the center cap before tapping in

Step 4b: Careful not the scratch the new center cap

Step 5: Push the lug nut covers onto each lug nut on each wheel